![]() ![]()
You should now have your E-Series array listed and ready to connect to: #Santricity storage manager download windows manualSelect Manual and enter the IP addresses your DHCP server gave to the array: When you launch the software for the first time you will be greeted by the Add Storage Array Dialog Box. If all is well you should see output like this below:Īs you can see, my DHCP server is supplied 192.168.1.2 and 192.168.1.3 to the management ports. These settings will tell Open DHCP Server to listen in on your 192.168.1.1 interface and serve up two IPs via DHCP: 192.168.1.2 and 192.168.1.3.Ĭonnecting To The E-Series Array Starting Your DHCP ServerĬonnect your laptop to the E-Series management port or ports if you happen to have a switch with you. #Lease Time can be different for this Range #Following are range specific DHCP options. #If you need range filters, look at example below #This example may be good enough for simple/home use. #This is first and simple DHCP range section example, #Requests from relay agents look for matching range to relay agent IP. #Requests from diffent Interfaces look for matching DHCP ranges. #always specify which cards will listen DHCP/DNS requests #if you have more than one NIC card on your server #Specify the Interfaces you would like Server to listen Open the OpenDHCPServer.ini file and make the following changes: I put a static IP on my laptop’s ethernet port of 192.168.1.1. Open DHCP Server is a light-weight open source DHCP server that can be run on your laptop that works perfect for setting up these E-Series arrays.Ĭonfiguring Open DHCP Server is pretty straight forward. The DHCP server that I run on my laptop is called Open DHCP Server, which can be downloaded from HERE. I prefer to directly connect the E-Series array to my laptop during initial setup. If you are connecting them to a network that has a DHCP server already running, you can skip this set. By default the E-Series arrays come preset to DHCP on the management ports. The next piece of software that we will need need is a DHCP server. #Santricity storage manager download windows installOnce downloaded, go ahead and install the software on your machine using all the default settings. In this guide we will be using SANtricity 11.10 which can be downloaded from Netapp HERE You will need to download the SANtricity Storage Manager software from NetApp. NetApp E-Series runs an operating system called “SANtricity”. We will need a couple pieces of software on your laptop to get things started. The Software You Need SANtricity Storage Manager In this example, I will use an EF550 array and demonstrate how we can go from out of box to having a LUN mapped in under 30 minutes. I wanted to put together a quick guide on setting up an E-Series array with a base configuration to show how fast you can have one of these online. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |